How to Fix a Drone that Won't Fly Broken Props Install Wrong and Wifi Interference Can't Takeoff

How to Fix a Drone that Won't Fly Broken Props Install Wrong and Wifi Interference Can't Takeoff

The tiny micro quad-copter drone CX-10 won’t take off if your blades/props are placed on the wrong motors.

Review the video to see how the rotor blades should look on your CX-10 mini-quad so you can fly this awesome bit of engineering.

WIFI Interference: 2.4ghz wifi will sometimes interfere and cause you to loose radio connection.

Your quad-copter will become none responsive and the props may rotate of out control. You’ll have to be careful because if the blades continue to spin when this happens you could break them.

Home wifi, cell phones, microwaves, TVs, Xbox interface all might be emitting some WIFI as well.

Fixing the CX-10 quadcopter is easy but you must be gentle not to break the plastic blades.

The blade slope must face inwards into the on and off switch and same for the front of the uav.

If you have wifi interference you’ll have to reset both the controller power switch and the copter power.

If you crash the quadcopter cx-10 you’ll have to reset the power as well because it may trip up the gyros inside the mother board.

Reset the quad copter and continue flying!

Recorded with:
Canon Vixia HG20
Edited in Adobe Audition CS6

how to fix a drone that won’t fly cheerson cx-10

Advertise Here

Free Email Updates
Get the latest content first.
We respect your privacy.

Camera Drones For Beginners

Advertise Here

Military Drones

Racing Drones

Advertise Here